Flue Gas Dew Point Temperatures - Engineering ToolBox
The dewpoint of sulfuric acid depends on the concentration of sulfur trioxide in the flue gas, but is typically about 280°F (138°C). Similarly, the dewpoint of hydrochloric acid depends on the concentration of hydrogen chloride. It is typically about 130°F (54°C).
21/08/2009 · The flue gas dew point temperature increases steeply from 90 degree centigrade to 135 degrees centigrade with sulphur percentage increasing up to 1%. A further increase in sulphur percentage in fuel gradually increases the dew point temperature from 135 degree centigrade to 165 degrees centigrade at 3.5% sulphur in fuel.
The flue gases of condensing boilers are at a temperature of around 60 o C as opposed to the ~140 o C of non-condensing boilers. Consequently, the emissions of a condensing boiler are closer to the dew point (the temperature at which the gases condense and become visible) and have a
Low Temperature Corrosion in Boiler and Its Prevention
The adiabatic dew point temperature of the flue gas is close to 65 °C. This is influenced by the moisture content of the flue gas  and the oxygen content of the exhaust gas .
30/03/2021 · The point at which the vapour reverts back to a liquid is called the Dew Point. This phenomenon is important when applied to chimneys, fuels, and fires. Burning any hydrocarbon fuel (gas, oil, wood, coal etc.) produces lots of water vapour in the flue gasses.
Flue gas dew point temperatures and the condensation of water vapor Engineering ToolBox - Resources, Tools and Basic Information for Engineering and Design of Technical Applications! - search is the most efficient way to navigate the Engineering ToolBox!
Combustion Efficiency and Excess Air - Optimizing boilers efficiency is important to minimize fuel consumption and unwanted excess to the environment; Combustion Testing - Combusting testing of fuel oil and gas burners; Flue Gas Dew Point Temperatures - Flue gas dew point