7.3 Flue gas discharge and air supply 31 7.3.1 General 31 7.3.2 Classification due to discharging flue gases 32 7.3.3 Material and installation 33 7.3.4 Single boiler conventional flue 33 7.3.5 Single boiler, room sealed flue 34 7.3.6 Different pressure zones 35 7.3.7 Modular installations 36 7.4 Hydraulic installation
To regulate the maximum gas pressure to the burner proceed as follows: • connect a gauge into the pressure socket B(fig.1). • remove the aluminium protective cap from screw A(fig.1) counter-clockwise; • turn the boiler on with the selector turned to the 7 winter position; • once ignited, set the "P1 MAX.
BOILER INSTALLATION page 7 BOILER CONTROL PANEL page 9 Check the technical data on the packing and on the plate located inside the front casing. Check that the burner is suitable for use with the type of gas available. fitted on top of boiler flue outlet before fitting elbow, this will allow pipework to run under flue pipe.
Baxi 613, 616, 619, 625, 630 Heat Installation and Service
Remeha Quinta 85 - Remeha Commercial Boilers
technical data 6 layout & components 7 pre-installation cleaning primary systems 8 mains supply 9 oil supply 10 water systems & pipework 12 condensate pipework internal connection 14 condensate pipework external connection 15 condensate to soak away & pressure relief pipework 16 boiler location & clearances 17 flue terminal positions 19
Technical Specification RADIANT BRUCIATORI S.p.A. Montelabbate (PU) ITALY By Technical Department INSTALLATION, AND MAINTENANCE MANUAL FOR GAS FIRED, WALL - HUNG BOILERS WITH DOMESTIC HOT WATER STORAGE CYLINDER Model RMAS 24 E TYPE C ROOM SEALED
CE 0694 ENGLISH Technical Specification RADIANT BRUCIATORI S.p.A. Montelabbate (PU) ITALY By Technical Department INSTALLATION, AND MAINTENANCE MANUAL FOR GAS FIRED, WALL-HUNG CONDENSING BOILERS WITH STORAGE CYLINDER models RKA 25 - RKA 100 TYPE C ROOM SEALED SEDBUK BAND A